News

Home > News > Content

Container Spreader Suspension Points Should Be Placed

Edit:Wuxi Golink Engineering Machinery Co.,Ltd   Date:Aug 09, 2017

Container Spreader Suspension points should be placed

When the wire rope is hoisting:

(1) If it is one-legged hoisting, then the hanging point should be placed on the top of the hanging material.

(2) If the legs are hoisted, then the hanging point should be on both sides of the weight, and the hook should be above the weight.

(3) If it is three legs or four legs hoisting, then the hanging point should be placed evenly on the plane around the weight, the hook should be just above the weight.

Chain rigging when lifting:

(1) the chain can not have knotted or twisted phenomenon, and can not use the hook to the top of the heavy load.

(2) If it is a one-legged rigging, then the hanging point should be placed on the top of the hanging material.

(3) If the legs are rigging, then the hanging point should be on both sides of the weight, the lifting point should be above the center of gravity of the weight.

(4) If it is three legs or four legs with rigging, then the hanging point should be placed evenly on the level of gravity center of gravity, but also in the weight center of gravity just above the job. Today, it is time to update the article, by

Lifting the belt, the use of the process of attention are:

(1) lifting belt if there is damage, then you can no longer continue to use, then immediately replace the new is.

(2) lifting belt with lifting operations, should avoid the phenomenon of twist or twist, but can not make it knot.

(3) If the lifting belt is moving, do not drag it.

(4) before use, the inspection must be carried out, can not be omitted.

(5) the joint parts of the sewing should be avoided being torn, and can not be overloaded.

(6) the use of places, should avoid corrosive substances or gases, so as not to cause corrosion.

(7) if it is used in a specific environment, then it should be a little attention, if necessary, you can consult the manufacturer.

In the grab this product, the following Xiaobian will mainly explain what its security use of technical provisions, the specific content is as follows.

1. The goods to be crawled should match the grapple used, because the different numbers of grapples have their corresponding capacity, so they can not be used casually.

2. In the shift, the grapple should be checked, whether there is damage and other issues, if it should be dealt with in a timely manner, do not let the grape disease work, because it will seriously damage the grab.

3. The lubrication of the grab should be carried out in accordance with the requirements so that it can be used normally.

4. When the grab some fault problems, should immediately stop using, such as the cracks on the grab, pole bending, metal structure, serious cracking, and its serious wear and tear, there are parts that are damaged, these are important signal.


Our Service

Wuxi Golink engineering machinery Co., Ltd is a large-scale comprehensive enterprise which integrates design, research & development, manufacture, sales &service...

Feedback

Tel: +86-510-83051112

Contact Us

Address: No.9, Tianshun Road Huishan Economic Development Zone, Wuxi Jiangsu, China

Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML

Copyright © Wuxi Golink Engineering Machinery Co.,Ltd

share: